KickAss Dual Zone Wireless Thermometer

KickAss Dual Zone Wireless Thermometer

Support Page Wireless Thermometer Manual

Wireless Remote Screen
Monitor your fridge from up to 30m away. Have confidence knowing your food is cold and ready whenever you need it.

Custom Audible Alarms
Fix the issue before it occurs. The custom audible alarm alerts you when your fridge/freezer exceeds your set temperature limit.

Multiple Mounting Options

Use the hook, stand or magnet to mount the remote display in multiple different locations. Ideal for moving around your campsite with ease.

Dual Temperature Sensors 
The dual temperature sensors work perfectly with the KickAss dual zone fridge, allowing you to monitor multiple temperatures at the same time. 

Minimum/Maximum Temperature Records 
Keep track of your temperatures with the handy memory function. Enjoy the confidence that your fridge is always performing at ideal temperatures.

 

The wireless sensors measure temperatures from -40°C to 60°C (-40°F to 140°F) with an accuracy of +/- 2°C. The indoor display thermometer works between 0°C and 50°C (32°F to 122°F). This wide range and reliable accuracy make it perfect for monitoring fridges, freezers, wine cellars, and even rooms or RVs.

Yes, the wireless thermometer sensors work well in covered exterior areas like outdoor porches and on the road in an RV. The indoor display and sensors communicate wirelessly without cords, allowing flexible placement in various environments.

Setup is quick and easy: insert batteries into the indoor display and both wireless sensors, then wait up to 5 minutes for the display to show temperatures. You can switch between Celsius and Fahrenheit with the '+/°C/°F' button and place the sensors where needed.

You can set custom alarms for each sensor by pressing and holding the relevant ALARM button for 5 seconds, then adjusting the maximum and minimum acceptable temperatures. If the temperature stays outside your set range for 10 minutes, the display sounds an alert.

If the display shows flickering numbers or dashes (---), press and hold the CLEAR button on the display for 3 seconds until you hear a beep, then wait 2 minutes for the signal to reconnect.

The display will show a low voltage battery icon to alert you when batteries need replacing. If sensors lose power or are out of range, the last known temperature will flash on the display until normal readings resume.

Absolutely. The sensors are designed for safe use inside fridges, freezers, and wine cellars, and the indoor display is suitable for rooms and covered outdoor areas. Just avoid placing sensors near hot, humid, corrosive, or flammable items like ovens, barbecues, gasoline, or liquids.

Yes, the indoor display shows current temperatures from both wireless sensors plus its own built-in thermometer. It also records and displays the maximum (MAX) and minimum (MIN) temperatures over time for each sensor, helping you track trends.