KickAss 240Ah Complete Slimline AGM Dual Battery Kit

KickAss 12V/24V 40A DCDC Charger With Solar MPPT + Pre-Wired Anderson Feature Overview

Charge your secondary battery from the vehicle’s alternator
Charge your secondary or auxiliary battery from the vehicle's alternator. Suitable for 12V or 24V vehicle setups and compatible with standard or smart alternators.

Lithium BMS Sleep Mode & Recovery Feature
In Lithium mode, when the voltage drops below the safety parameters, the DCDC charger will begin recovery mode. The DCDC will trickle-charge the battery until it reaches the cut-in voltage and begins normal chagrin.

Plug and Play Pre-wired Anderson Connection
Provides a strong and secure connection you can rely on every time. Perfect for DIY installation.

True 3-stage Charging
Advanced algorithms enhancing the overall charging performance.

Automatic Battery Isolation
Automatically isolates your starter battery when no charge is detected, preventing parasitic drain by your auxiliary battery. Meaning you’ll never drain your starter battery.

Built in 40amp MPPT With Separate solar input
Extracts the maximum available power from your solar panels, then converts to the best voltage to get maximum current into your battery.

IP66 Dust & Water Protected
Protected against dust and strong jets of water.

Backwards Compatibility
Compatible with common two pin Anderson connectors, allowing for a normal positive & negative wire connection in the even the ignition wire is not needed.

*Please note use of this battery under your bonnet, to power trolling motors or in electric golf buggies will void your warranty. More suitable battery types for these applications are CCA rated batteries. KickAss Batteries are not CCA rated and should not be used to start vehicles.

KickAss Slim 12V 120Ah Deep Cycle AGM Dual Battery

The slimline range of AGM batteries are the solution to tight applications in your 4X4 vehicle, caravan or campervan. easily install out KickAss Slimline Batteries into areas that otherwise would have been impossible with a normal sized battery. Combine with the KickAss 170ah Battery Tray and easily install your KickAss Battery behind the rear seat of your dual cab ute.

Power 12V lights, fridge/freezers, Inverters, phones, laptops, and other 12/24V camping accessories. With a KickAss Battery on the road with your power and electricity troubles will become a thing of the past. They are even suitable for saltwater/marine application like your boat.

Features:

To make your life easier KickAss AGM Deep Cycle Batteries are completely sealed and maintenance free. No more refueling terminals with water or electrolyte

Safety Valve:

You can rely on the in-built safety valve to keep you and your family safe by ensuring the battery is completely sealed.

Exceptional Deep Discharge Recovery:

High oxygen-recombination efficiency ensures no loss of electrolyte, giving the batteries exceptional deep discharge recovery performance, just in case you accidentally discharge your batteries a little too much! This also ensures you will never need to replace electrolyte during the course of the batteries' life.

Corrosion Resistant:

Lead-calcium grids maintain a low self-discharge rate approximately 3% of capacity per month. This ensures that your KickAss AGM battery has a longer lifespan.

Quality Copper-Silver Terminals:

small contact resistance and high corrosion resistance. So you never have to worry about your KickAss Deep Cycle battery corroding.

Detachable Handles:

Looking to maximise space in a tight spot? The detachable handles can be conveniently be removed when installing and reattached when relocating the battery.

5-Year Warranty

All KickAss AGM batteries are backed by a 5 year pro rata Australian Warranty, these batteries not only look awesome, they KickAss!

Additional Features

• Power your 12V fridges, high powered inverters, lights or any other 12V appliances
• Store solar or wind power
• Suitable for 4x4 and Marine Conditions
• Completely Sealed - (allowing you to place the battery in whatever angle is needed)
• High vibration resistance - (Enables them to withstand even the toughest 4x4 tracks)
• Rugged ABS Container - The tough and high-quality ABS container will last for decades without aging or deforming: keeping your battery looking brand new!
• 99.7% pure lead calcium grids

Applications:

• Solar applications
• Marine Applications
• Telecommunications
• Emergency Power System
• Power plant and power transformer system
• Control Equipment.

KickAss Features:

• 1000W Continuous Output
• Pure Sine Wave
• 94% Efficiency Max
• Multi-level Protection
• Surge Power: 2000W in 2 seconds
• Intelligent Fan
• Integrated Charging Port
• Multiple Mounting Options
• Optional remote control display

1000W Continuous Output

Seamlessly convert 12V DC power from your battery into 240V AC power that can be used to run everyday household appliances. Your next camping trip will be a lot more fun if you take your coffee machine and electric BBQ!

Pure Sine Wave

The inverter produces a clean and reliable pure sine wave which replicates the AC power you get from your wall-based power point at home. It is much cleaner and more reliable than a modified sine-wave, and is so stable that you can use it to run sensitive electronic devices like laptops, Starlink and CPAP machines. It will also reduce electromagnetic interference, extend equipment life, and run so quietly you'll barely hear it.

94% Efficiency

The inverter is highly efficient and will convert your power at a rate of 94% max efficiency. That means minimal waste during the conversion from DC to AC, and you won’t waste your battery’s capacity.

Multi-level Protection

The multi-level safety protection utilises both software and hardware features to protect you, your inverter and your devices. The inverter continuously monitors the input and output signals and will trigger a protection mode if the unit is detected to be operating in an unsafe state. Safety protection includes over voltage, overload, overcurrent, short circuit and reverse polarity.

Surge Power: 2000W in 2 seconds

With a peak surge rating of 2000W for up to 2 seconds, the inverter can power devices with a high inrush current, making it perfect for power tool battery chargers, microwaves, and induction cooktops.

Intelligent Fan

Your inverter will never overheat thanks to the intelligent fan system, which dynamically adjusts the fan’s speed. The smart fan ensures that the inverter stays cool and efficient – a cool inverter is an efficient inverter, and this will maximize your power output.

Integrated Charging Port

Recharge your gadgets easily directly from the inverter via the integrated 5V 2.1 USB port.

Multiple Mounting Options

The inverter has four convenient mounting points, which make it a breeze to install it in your camper, caravan, or canopy.

Optional remote control display

The optional remote control display unit enables you to track your power usage anytime and anywhere. The screen is low-profile and discreet and is easy to flush-mount. Install it in your camp kitchen to keep an eye on power usage when operating high-powered appliances like coffee machines or kettles. Once finished, shut down the inverter via the integrated on/off switch to save your battery.

This 3-pin Anderson-style connector with built-in ignition wire makes connecting your 12V dual battery system easy. Perfect for wiring DC/DC chargers, battery boxes & auxiliary batteries.

120AH KickAss Slimline Battery Tray

Built specifically for our range of Slimline batteries, our brand-new slimline battery trays are the solution to securing your KickAss slimline battery. These KickAss battery trays are perfect for installation behind the rear seats of a modern 4WD dual cab, or in its canopy.

Behind Seat Battery Tray

Store your battery out of sight and maximise storage space for your other belongings. 

Heavy Duty Slimline Battery Mount

Constructed with a lightweight & strong aluminium frame to protect and secure your battery. A heavy duty slim battery tray designed for the toughest Australian Terrain.

Hold-Down Straps

Our slimline battery holder features 2 heavy duty straps that hold your battery in place. These can easily be detached, allowing easy access your battery.

Factory Mounting Holes

Simply mount your slim battery tray via the factory mounting holes. Comes with all bolts and screws included, so you don’t have to shop around for extras.

Please Note - Please check the product specifications before purchase. KickAss is not responsible or liable for any modification performed on your vehicle.

KickAss 500A Battery Monitoring Shunt with Remote Display

Accurate Charge Status of Battery

Feel confident knowing your battery’s state of charge at all times. No more replying on voltage to determine battery.

Compatible with Most Modern Battery Types

Compatible with AGM, GEL, Sealed Lead Acid, Flooded Lead Acid, and LiFePO4 batteries. Perfect for charging several battery types including starter, deep-cycle, marine, powersports and more.

Preserve Battery Life with Battery Input/Outputs Monitoring

Get more out of your battery than ever before. Understand both the charge and draw of your battery on one informative screen.

Audible Low Battery Voltage Alarm

Don’t let a flat battery ruin your trip! The audible alarm will notify you when your battery has low voltage. The audible alarm is easily programmable.

Capable of Monitoring up to 500A Load

Perfect for running heavy loads with your inverter, or other high powered appliances.

Mounts Directly to your Battery Terminal

Get accurate information fast, straight from the source.

An optional 5m extension cable also available, for versatile mounting.

Our battery tray accessory panel attaches to the KickAss Slim Battery Tray, and allows you to mount accessories together with your setup.

Secure your KickAss DCDC Charger, LVD, Circuit Breakers and more with this Battery Tray Accessory Panel. Pre-drilled holes make it easy to mount your KickAss gear.

KICKASS^® MAXI Fuse Anderson Cable

We have developed and designed our all-new KICKASS^® MAXI Fuse Anderson cable to be the perfect solution for connecting up a battery to just about anything. This cable provides the ultimate circuit protection ensuring your battery is fused correctly through an 80A inline MAXI Fuse thus preventing a major meltdown should you ever have a short circuit in your system. 

The length of this cable has been specially designed to provide adequate reach when connecting to the vehicle starting battery. The provided length allows the cable to be expertly run through the battery compartment and connect to other cables such as dual battery wiring. The MAXI Fuse holder is weatherproof and integrated into the cable making it very easy and fast to install - there is no need to spend time mounting like traditional fuse holders or circuit breakers. 

The cable includes a 50 Amp Anderson style connector at one end providing a seamless connection to any device or electrical systems such as battery boxes or solar panels that use Anderson style connectors. At the other end of the cable, two high-quality 8mm ring terminals simply connect to your battery making this cable the main fused connection point. A spare 80A MAXI Fuse is also included with the cable so you have a backup if needed.

Features

• In-line weatherproof MAXI Fuse holder with 80A MAXI Fuse
• Length 750mm
• Cable type: Twin 8B&S (7.71mm2) Red / Black Sheathed
• 1 x 80A MAXI Fuse pre-installed in holder
• 1 x 80A MAXI Fuse spare
• 8mm ring terminals

See links below for replacement fuses:

Spare 50A MAXI Fuse - Red

200mm Length Pair (Black & Red) Battery Joiner Pack

Combine batteries in parallel to create a battery bank and increase your power storage capabilities. These cables can also be used for series connections to gain 24 Volt from two 12 Volt batteries.

2 x 200mm long - 6 B&S battery joiner,12V cabling is suitable for 4WD and light commercial vehicles.
Rated to 100Amps

10mm Hole in Lug

Note: Always ensure your batteries are connected together correctly for your desired application.