KickAss 12V Water Pump - Self Priming, 6L/minute

KickAss 12V Water Pump - Self Priming, 6L/minute

Support Page User Manual

KickAss Self Priming Water Pump 6L/Min

The KickAss 12V pressure pumps are specifically designed to pump water into your caravan, boat, or 4WD. Our 6L/min pump is the perfect 12V water pump for camping, ideal for use with camping sinks, taps, or other devices where a low flow rate is desirable.

Key Features

Self-Priming Water Pump 12V

Self-priming functionality means the pump automatically starts when the tap is turned on.

6L/Minute Flow Rate – 12V High Pressure Water Pump

Designed to pump water to taps and devices where a low flow rate is needed. Capable of draining a 100L tank in under 17 minutes.

Hardwired Connection

Pre-stripped cables allow for secure, hardwired connections, ensuring reliable performance even in hard-to-reach areas.

Low Power Consumption

Perfect for solar and small amp hour battery setups where energy-efficient appliances are essential.

Watertight Fitting Lock Pin

Slip-in fittings grip the inside diameter of the tube and seal securely. Combined with hose clamps and a fitting-lock pin for dependable, leak-free connections.

The KickAss 12V Water Pump delivers 6 litres of water per minute at a maximum pressure of 65 psi. This makes it ideal for supplying water to taps, showers, or sinks in caravans, boats, and camping setups. Its strong 65 psi pressure ensures reliable water flow for your off-grid needs.

Yes, the KickAss 12V Water Pump is constructed from corrosion-resistant coated iron, allowing it to handle both fresh and salt water. This durability means you can confidently use it in marine environments or freshwater camping without worrying about corrosion damage.

The pump should be mounted horizontally on a solid surface for optimal self-priming and noise reduction, with the motor positioned above the pump if mounted vertically. Connect flexible hoses with hose clamps to the barbed connectors, and wire it to a dedicated 12V circuit with an on/off switch and fuse rated for 6 amps. Proper installation ensures automatic operation when you turn on a tap.

The KickAss 12V Water Pump is self-priming after initial setup and priming for airlocks. You need to prime it only when first used, after long storage, or after plumbing changes by running the pump with an open outlet tap to clear trapped air. Once primed, it starts automatically at the turn of a tap, making it hassle-free for everyday use.

The pump can run dry for short periods without damage thanks to its thermal overload protection and robust design. However, it is designed for intermittent use, not continuous pumping, to avoid overheating. Its built-in protections ensure longevity and safe operation during typical caravan or boat water supply tasks.

The pump requires a 12V DC power supply with a dedicated circuit, including an on/off switch and a 6-amp fuse installed between the battery and the pump’s positive terminal. This setup protects the pump and electrical system, ensuring safe and reliable operation during your adventures.

Regular maintenance includes priming after long storage, ensuring adequate ventilation during operation, and draining the pump before freezing weather. Using flexible hose and a filter on the inlet prevents debris damage. Following these steps helps the pump deliver reliable performance over many years.

Do not pump flammable liquids or use the pump where flammable vapours are present. Always ensure adequate ventilation to prevent motor overheating. The pump’s thermal overload protection and corrosion-resistant materials keep it safe and durable in a wide range of outdoor environments.