KickAss Twin 12V 120Ah Lithium Dual Battery Kit with 2000W Inverter, 40A DCDC Charger, Shunt, Display Panel, Tray & Wiring - 240Ah Capacity

KickAss 12V to 240V Pure Sine Wave 2000W Inverter Feature Overview

2000W Continuous Output

Plenty of power to run all your AC essentials while on the move—induction cooktops, coffee machines, battery chargers for your power tools, and more.

Pure Sine Waveform

Delivers a clean and reliable sine wave output that replicates the AC signal from a home power point. Unlike modified sine wave inverters, the KickAss Pure Sine Wave Inverter is ideal for running sensitive electronics such as laptops, Starlink systems, and CPAP machines.

AC Automatic Transfer Switch

Simplify your off-grid setup with the integrated Automatic Transfer Switch. Power your AC devices from your battery bank, then seamlessly switch to mains power by plugging in the AC input cable. If mains power drops out, the inverter automatically switches back to battery power without interruption.

Multiple Protective Features

Multi-level safety protection uses both software and hardware safeguards to protect you, your inverter, and your devices. The system continuously monitors operation and automatically enters protection mode if necessary. Integrated Residual Current Devices (RCD) and Circuit Breakers (CB) provide added hardware protection, making it suitable for commercial and domestic use.

Optional Remote Control Display (Not Included in Base Version)

Enhance your setup with the optional remote display, allowing you to monitor and manage power usage remotely. The flush-mountable screen is low-profile and ideal for installation near your camp kitchen. It includes an integrated on/off switch for conserving battery power when the inverter is not in use.

Note: Only compatible with the blue KickAss remote inverter screen.

Powerful 40A Dual Battery Charging

With a high 40A output, this charger is perfect for keeping larger lithium and lead acid battery systems topped up and ready for action. It ensures fast, safe charging for demanding off-road or touring applications.

Bluetooth Monitoring & App Control

Connect your charger to your smartphone via Bluetooth to monitor performance in real time. The KickAss App gives you complete visibility over charging status, voltages, current flow, and system alerts – all from your pocket.

Simple Plug & Play Installation

Thanks to Anderson-style connectors, installation is quick and hassle-free with no complex wiring required. It’s designed for DIY setups and easy integration into your existing system.

Dual Input: Alternator & Solar Charging

Charge from your vehicle’s alternator while driving or connect a solar panel when stationary – this charger handles both. Its built-in MPPT solar regulator ensures maximum efficiency when using solar input.

Built for Aussie Conditions

Rated IP66, the KickAss 40A DCDC Charger is waterproof, dustproof, and rugged enough to handle corrugated tracks, extreme heat, and remote adventures. It’s built tough for Australian conditions.

Compatible with 12V & 24V Alternators

Highly versatile, this charger is compatible with both 12V and 24V alternators, making it suitable for a wide range of vehicle types including trucks, commercial vehicles, and 4WDs.

Adjustable Max Input Current – Hybrid Compatible

The maximum input current can be configured via the Bluetooth app, allowing the charger to limit the draw from your vehicle’s alternator, without reducing the maximum charge current when charging from solar. This makes it ideal for some hybrid vehicles or those with low-output alternators, helping prevent overload and ensuring stable, efficient charging without placing strain on your electrical system.

Smart Alternator Ready

Modern vehicles with smart alternators are no problem. The unit supports both smart and fixed-voltage alternators and includes an ignition trigger wire to start or stop charging based on engine status.

Lithium Battery Compatible

Fully lithium-ready, this charger includes an automatic lithium wakeup function that can safely restore LiFePO4 batteries from low voltage protection or sleep mode – no manual intervention needed.

Advanced Multi-Stage Charging

Precision charging algorithms help extend the life of your auxiliary battery. The charger delivers multi-stage charging tailored to the battery type, helping maintain peak performance over the long haul.

Starter Battery Isolation

To protect your starting battery, the charger only delivers current to your auxiliary battery when the engine is running, and automatically disconnects when the vehicle is off – eliminating unwanted drain.

Supports Multiple Battery Chemistries

Whether you’re using lithium, AGM, wet, gel, or calcium batteries, this charger has you covered. It’s a versatile solution designed to support a wide range of battery types.

Perfect for 4WDs, caravans, camper trailers, and off-grid touring setups, the KickAss 40A DCDC Charger with Solar MPPT and Bluetooth delivers intelligent charging for serious adventurers.

This 3-pin Anderson-style connector with built-in ignition wire makes connecting your 12V dual battery system easy. Perfect for wiring DC/DC chargers, battery boxes & auxiliary batteries.  

KickAss 500A Battery Monitoring Shunt with Remote Display

Accurate Charge Status of Battery
Feel confident knowing your battery’s state of charge at all times. No more relying on voltage alone to determine battery health.

Compatible with Most Modern Battery Types
Works with AGM, GEL, Sealed Lead Acid, Flooded Lead Acid, and LiFePO4 batteries. Ideal for charging starter, deep-cycle, marine, powersports batteries and more.

Preserve Battery Life with Battery Input/Output Monitoring
Monitor both charge and power draw on one clear screen to extend battery life and performance.

Audible Low Battery Voltage Alarm
Avoid trip interruptions—an audible alarm alerts you when voltage drops. The alarm is easily programmable for custom thresholds.

Capable of Monitoring up to 500A Load
Perfect for high-powered setups including inverters and other heavy-duty appliances.

Mounts Directly to Your Battery Terminal
Fast, accurate data straight from the source. Optional 5m extension cable for flexible mounting.

400mm Length Pair (Black & Red) Battery Joiner Pack

Combine batteries in parallel to create a battery bank and boost your power storage capacity. These cables can also be used in series to achieve 24V from two 12V batteries.

Note: Always ensure your batteries are connected correctly for your intended application.

KickAss Pure Sine Wave Inverter Remote Display Panel Feature Overview

Real-Time Monitoring

Unexpected power fluctuations can damage your equipment and waste valuable energy. With real-time monitoring, you can track your energy generation and power usage, spotting any problems early. This keeps your setup running smoothly and efficiently at all times.

Remote Control

Monitor and manage your power consumption from a distance—for example, from the front seat while your inverter is installed in the back of your truck. The included 3-metre cable allows you to access and control your inverter system easily.

Fault Diagnostics

When a system malfunction occurs, diagnosing the problem can be challenging and time-consuming. The KickAss Inverter Remote Display automatically identifies and reports inverter faults, providing detailed diagnostics to simplify troubleshooting.

Intuitive User Interface

The display screen is clear and easy to navigate. View energy metrics, adjust settings, and set alerts with confidence—no guesswork, just clear and precise information.

Compatible with Most KickAss Inverters

The remote display unit is compatible with KickAss 2000W and 3000W inverters (not compatible with 700W or 1200W models). Seamlessly integrate it into your current setup or upgrade your system with ease.

Please note: This remote display is not compatible with older red KickAss 700W, 1200W, 2000W, or 3000W inverters.

KickAss MAXI Fuse Anderson Cable

The KickAss MAXI Fuse Anderson Cable is the perfect solution for connecting a battery to virtually any device. It offers superior circuit protection through an inline 80A MAXI Fuse, safeguarding against short circuits and potential system damage.

With a purpose-designed length, this cable easily reaches vehicle starting batteries and integrates seamlessly with dual battery setups. The built-in weatherproof MAXI Fuse holder simplifies installation, eliminating the need for mounting traditional fuse holders or circuit breakers.

One end of the cable features a 50 Amp Anderson style connector for effortless connection to battery boxes, solar panels, or other compatible devices. The other end includes high-quality 8mm ring terminals for secure battery attachment. A spare 80A MAXI Fuse is included for added convenience.

Features:

• In-line weatherproof MAXI Fuse holder with 80A MAXI Fuse
• Length: 750mm
• Cable type: Twin 8B&S (7.71mm²) Red/Black Sheathed
• 1 x 80A MAXI Fuse pre-installed in holder
• 1 x 80A MAXI Fuse spare
• 8mm ring terminals

See links below for replacement fuses:

Spare 50A MAXI Fuse - Red