Complete off-grid power solution featuring 170Ah AGM battery, 25A DCDC charger, 1000W inverter, and control box.
Everything that is included in this KickAss kit!
Durable 12V auxiliary battery for caravan, camping and 4WD dual battery systems. Charge from solar panel, alternator & 240V mains power. 5 year warranty.
Battery Comparison Table
*Please note: Use of this battery under your bonnet, to power trolling motors or in electric golf buggies will void your warranty. More suitable battery types for these applications are CCA-rated batteries. KickAss Batteries are not CCA rated and should not be used to start vehicles.
KickAss Slim 12V 170Ah Deep Cycle AGM Dual Battery
The slimline range of AGM batteries are the solution to tight applications in your 4X4 vehicle, caravan or campervan. Easily install our KickAss Slimline Batteries into areas that otherwise would have been impossible with a normal sized battery. Combine with the KickAss 170Ah Battery Tray and easily install your KickAss Battery behind the rear seat of your dual cab ute.
Power 12V lights, fridge/freezers, inverters, phones, laptops, and other 12/24V camping accessories. With a KickAss Battery on the road your power and electricity troubles will become a thing of the past. They are even suitable for saltwater/marine applications like your boat.
Additional Features
Applications:
Charge your dual battery system quickly and safely with this 25A DCDC Charger. Compatible with lithium and all lead acid battery types, it features solar MPPT, Bluetooth control, smart alternator support, lithium wakeup, and multi-stage charging – all in a tough, IP66-rated, plug & play unit built for Aussie conditions.
Powerful, Smart Charging for Dual Battery Systems
The KickAss 25A DCDC Charger is the ultimate solution for powering small to medium dual battery setups. Delivering a fast and safe 25A charge rate, it’s ideal for both lithium and lead acid batteries – keeping your system charged and ready whether you’re in the bush or the backyard.
Monitor & Control with Ease
Built-in Bluetooth allows you to set up and monitor your charger directly from your smartphone. Track input and output voltages, currents, charge status, and receive real-time system alerts and warnings – all from the palm of your hand. You can also take advantage of Over-The-Air (OTA) updates, enabling you to download the latest firmware, improvements, and new features as soon as they’re released.
Plug & Play Installation
Fitted with Anderson connectors, this unit offers true plug & play installation – no hardwiring required. Setup is quick and hassle-free, making it perfect for DIY installs.
Dual Input Charging – Alternator & Solar
Charge your auxiliary battery from your vehicle’s alternator or connect a solar panel for off-grid charging. The smart dual input system gives you the flexibility to adapt to any setup.
Built for Harsh Conditions
Designed and tested to handle the toughest Aussie environments, this charger boasts an IP66 rating for dust and water resistance – ready for life off-road.
Compatible with 12V & 24V Systems
Versatility is built in. This charger works with both 12V and 24V alternators, making it suitable for a wide range of vehicles.
Hybrid Vehicle Ready
The maximum input current can be set via the Bluetooth app, allowing the charger to limit the alternator draw – which is ideal for vehicles with low-power alternators or hybrid systems with limited output capacity.
Smart Alternator Support
Compatible with both fixed and variable voltage alternators, the charger includes an ignition trigger wire that enables or disables charging automatically with your vehicle’s ignition – ideal for modern vehicles.
Lithium Battery Compatible with Auto Wake-Up
Fully lithium-ready, the charger includes an automatic lithium wake-up feature to revive low-voltage lithium batteries safely, without manual intervention.
Multi-Stage Charging
Advanced multi-stage charging algorithms ensure your battery is charged optimally and maintained in peak condition, helping to extend battery life.
Starter Battery Protection
The charger draws power only when the engine is running, automatically isolating when the vehicle is off – preventing any parasitic drain on your starter battery.
Supports Multiple Battery Types
This DCDC charger works with a wide range of battery chemistries – including Lithium, AGM, Wet, Gel, and Calcium – offering flexibility no matter your setup.
The KickAss 12V to 240V Pure Sine Wave 1000W Inverter is perfect for powering low-power devices like blenders, power tools, laptops, phones, tablets, cameras, drones, microwaves, and CPAP machines, providing clean and stable energy for all your needs.
KickAss Features:
1000W Continuous Output
Seamlessly convert 12V DC power from your battery into 240V AC power to run everyday household appliances. Your next camping trip will be even better with essentials like a coffee machine or electric BBQ.
Pure Sine Wave
This inverter produces a clean and stable pure sine wave that replicates AC power from a home wall socket. It's safe for sensitive electronics like laptops, Starlink, and CPAP machines, while also reducing electromagnetic interference and extending equipment life. It runs so quietly you'll barely hear it.
94% Maximum Efficiency
Designed for high efficiency, the inverter converts power at up to 94% efficiency, minimising energy waste and making the most of your battery’s capacity.
Multi-level Protection
Advanced safety features protect you, your inverter, and your devices. The system continuously monitors input and output, automatically triggering protection modes in unsafe conditions. Protection includes over-voltage, overload, overcurrent, short circuit, and reverse polarity safeguards.
Surge Power: 2000W in 2 Seconds
With a peak surge capacity of 2000W for up to 2 seconds, the inverter is ideal for devices with a high inrush current such as power tool chargers, microwaves, and induction cooktops.
Intelligent Fan
The dynamic, intelligent fan system adjusts automatically to keep the inverter cool, ensuring maximum efficiency and reliable performance without overheating.
Integrated Charging Port
Easily recharge small gadgets with the built-in 5V 2.1A USB port—ideal for phones, tablets, and accessories.
Multiple Mounting Options
Featuring four convenient mounting points, the inverter is easy to securely install in your camper, caravan, or canopy.
Optional Remote Control Display
Take the guesswork out of managing your power with the KickAss Smart Monitor Lite Shunt + Tank Sensor. Track charge, discharge and State of Charge in real time, see how long your battery has left to run or recharge, and even monitor water tank levels from one smart system. View data via Bluetooth or the colour LCD for total off-grid confidence.
Please check the specifications table to confirm compatible tank sensor types before installation.
The KickAss Smart Monitor Lite Shunt + Tank Sensor is a powerful, easy-to-use solution for monitoring your off-grid power and water systems. Designed for touring rigs, caravans and 4WD setups, it gives you clear, reliable insight into how your battery bank is performing, how long you can keep running your gear, and when it’s time to recharge or top up the tank.
At the heart of the system is a high-capacity 600A shunt that accurately measures charge and discharge current, battery voltage and State of Charge. This allows you to understand exactly what’s happening inside your battery bank, helping you manage power more efficiently and avoid unexpected shutdowns when running fridges, lighting, inverters and other essential off-grid equipment. As loads and charging sources change, the system continuously provides real-time calculations and updates how long your battery has left to run or how long it will take to recharge. This takes the guesswork out of power management and makes it easier to plan your usage while travelling off-grid.
The Smart Monitor Lite can also connect to your tank sensor or sender, allowing you to monitor both your battery data and water level from a single unit. It’s compatible with resistive and voltage-type tank senders and can be calibrated to suit virtually any tank size or shape.
Monitoring and setup are simple thanks to Bluetooth connectivity and the dedicated mobile app. View real-time voltage, current, power and State of Charge from your smartphone, configure battery and tank settings, and review historical performance data whenever you need it. For quick checks without reaching for your phone, the colour LCD remote display provides clear, at-a-glance system information right where you want it.
Installation and configuration are straightforward, even for more complex setups. The intuitive app interface guides you through setup with clear menus and prompts, making it easy to tailor the system to your specific battery chemistry and capacity. The shunt supports AGM, lithium and other common battery types, from small single-battery systems through to large dual-battery lithium banks.
Integrated data logging records voltage, current and temperature for up to 35 days, allowing you to review power usage trends over the course of a trip. With a wide input voltage range and flexible power options, the unit can be powered directly from the battery or an external supply and used with battery banks of any voltage. For added control and protection, the external relay output allows you to automate system behaviour based on voltage, current, power or temperature.
The KickAss 12V Control Box distributes power from your auxiliary battery to charge up to 11 devices at once. Built with 6 USB ports, 3 12V Cig Sockets and 2 Anderson-style input/outputs.
Power up to 11 Devices Simultaneously
The KickAss 12V Mini Power Box distributes power from your auxiliary battery to power up to 11 different devices at once. Built with 6 x USB ports, 3 x 12V cigarette sockets, and 2 x Anderson input/output ports, you can power phones, tablets, 12V fridges, ovens, vacuum sealers, projectors, and more.
4 x USB Ports Featuring USB-C & QC3 Ports
Get blazing fast charging on all your USB devices with the USB-C and QC3 Port (Quick Charge 3.0). Charge phones, tablets, and more. Charge up to 6 USB devices simultaneously!
2 x Anderson Input/Outputs – Charge from Solar
Power 12V fridges, travel ovens, or even charge your auxiliary battery from regulated solar panels using the quick-connect Anderson connectors.
Built-in 3-Stage LED Light
Never be lost in the dark again. The KickAss Mini Box has a built-in 3-stage LED light, perfect for providing light when you cannot find your phone or torch.
LED Voltmeter Multi-Colour
The LED voltmeter shows your battery condition at a glance. With its multi-coloured display, you can clearly see the voltage of your battery day or night. Never end up with an unexpected flat battery. Please note the on/off switch is for the voltmeter only.
Multiple Mounting Options
Two convenient mounting points allow for easy installation into your canopy, camper, or caravan.
Anti-Slip Rubber Feet
The anti-slip rubber feet prevent your power box from slipping and help protect surfaces from scratches.
Protective Dust Cover & Anderson Cable Protective Cover
Protect the USB ports with the USB dust cover. The Anderson cable protective cover shields the cable end from dust and prevents disconnection.
Warning: A battery must be connected prior to connecting a regulated solar panel. The regulated solar panel must be disconnected before the battery is disconnected. Failure to do so may void your warranty.
Note: This unit is not waterproof and should not be mounted outside.
Note: This unit is not a standalone power source and must be connected to a power supply to power your devices.
Connect your 12V dual battery system with this 3-pin Anderson connector with built-in ignition wire. Everything included for DIY install. Ideal for DC/DC chargers, battery boxes, auxiliaries etc.
KickAss Premium Plug & Play DC-DC Wiring Kit
Introducing the ultimate dual battery system wiring kit, now featuring a three-pin 50 Amp Anderson-style connector with ignition wire. The team at KickAss has carefully developed this premium plug-and-play wiring kit for ultra-easy DIY installations. It’s packed with high-quality components to ensure your setup is smooth and professional.
The kit is fully plug-and-play for any system using Anderson connectors for charging input and includes everything needed for a professional wiring installation. It now comes with our famous Maxifuse cable pre-installed into 6 metres of heavy-duty 8 B&S cable, providing 50A of circuit protection. The new three-pin Anderson plug allows for easier installation by integrating an ignition wire directly into the connector—eliminating the need to run multiple cables through your vehicle.
The cable is pre-crimped with Anderson connector terminals, making it simple to feed through holes and grommets. Once installed, you just clip on the three-pin Anderson connector. The kit also includes cable ties for securing cables, a spare 80A Maxifuse, a 3-metre ignition tail wire, and spare Anderson terminals.
Backwards Compatibility
The three-pin Anderson connector is backwards compatible, allowing a two-pin Anderson connection to work even if the ignition wire is not connected.
The KickAss Premium DC-DC wiring kit is specifically designed for our DC-DC chargers and is not compatible with VSRs.
For Other Installations, Please Use Our Dual Battery Wiring Kit When:
This Kit Includes:
Secure your battery with the KickAss Battery Tray for rear seat mounting in Dual Cab Utes. Made in Australia, includes factory mounting points.
Our brand new KickAss Slimline 170ah Battery Tray is the customised solution to securing your battery, built specifically for the KickAss Slim 12V 170AH Portable Deep Cycle AGM Battery.
The KickAss 170ah Battery Tray is made from lightweight aluminuim for a secure and safe battery, when driving in tough Australian conditions.
The KickAss 170ah Battery Tray utilise factory mounting points meaning, no aditional drilling required. Secure with the screws and bolts provided.
Our Slimline brackets are made from 100% Australian materials for guaranteed quality. Tested for harsh Australian off-road conditions. Ensure your battery is always secure when traveling, with the KickAss Slimline 170ah Battery tray.
Hold Down Straps
Our Slimline Battery features two heavy duty straps to secure your battery. The can easily detached, allowing for access to your battery.
Please Note - KickAss is not responsible or liable for any modification performed on your vehicle.
Connect your inverter using this premium wiring kit, designed specifically for 1000W systems. It includes heavy-duty cables, high-quality connectors and protective components to ensure a safe, efficient and reliable installation in your 4WD, caravan or off-grid setup.
This heavy duty cable features weatherproof casing to protect the fuse from dust and damage. The durable 8 B&S cable is encased in a smooth PVC outer layer for protection and ease of use.
KickAss MAXI Fuse Anderson Cable
The KickAss MAXI Fuse Anderson Cable is the perfect solution for connecting a battery to virtually any device. It offers superior circuit protection through an inline 80A MAXI Fuse, safeguarding against short circuits and potential system damage.
With a purpose-designed length, this cable easily reaches vehicle starting batteries and integrates seamlessly with dual battery setups. The built-in weatherproof MAXI Fuse holder simplifies installation, eliminating the need for mounting traditional fuse holders or circuit breakers.
One end of the cable features a 50 Amp Anderson style connector for effortless connection to battery boxes, solar panels, or other compatible devices. The other end includes high-quality 8mm ring terminals for secure battery attachment. A spare 80A MAXI Fuse is included for added convenience.
Features:
See links below for replacement fuses:
Spare 50A MAXI Fuse - Red
Designed to pair seamlessly with the KickAss 600A Smart Shunt with Battery & Tank Monitor, this Power Connections Kit takes the hassle out of installation. It includes a heavy-duty 95mm² negative hookup cable plus the smaller positive and negative power leads required to run the shunt, delivering a quick, clean, reliable setup.
The KickAss 600A Smart Shunt Power Connections Kit is the perfect companion to your KickAss 600A Smart Shunt with Battery & Tank Monitor, designed to make installation quick, clean and easy. This purpose-built kit includes the main heavy-duty negative connection between your battery and shunt, along with the smaller positive and negative power cables required to run the shunt itself. With everything sized correctly and ready to go, it eliminates guesswork and ensures your monitoring system is powered safely and accurately from day one.
Built for serious off-grid and touring setups, the kit features a rugged 95mm² negative hookup cable designed to handle high-current loads with minimal voltage drop. Whether you're running a lithium battery bank, dual battery system or high-draw accessories, these cables deliver dependable performance in harsh environments. By using the correct cabling for your shunt installation, you'll get more accurate readings, improved reliability and a cleaner, more professional finish to your power system.
Mount your KickAss Smart 25A or 40A DC/DC Charger, along with your LVD, Circuit Breakers and other accessories, using this Battery Tray Accessory Panel.
Install your inverter close to your batteries, and still be able to monitor and control your power usage easily from a distance thanks to this handy remote display. Comes with a 3 metre cable.
KickAss Pure Sine Wave Inverter Remote Display Panel Feature Overview
Real-Time Monitoring
Unexpected power fluctuations can damage your equipment and waste valuable energy. With real-time monitoring, you can track your energy generation and power usage, spotting any problems early. This keeps your setup running smoothly and efficiently at all times.
Remote Control
Monitor and manage your power consumption from a distance—for example, from the front seat while your inverter is installed in the back of your truck. The included 3-metre cable allows you to access and control your inverter system easily.
Fault Diagnostics
When a system malfunction occurs, diagnosing the problem can be challenging and time-consuming. The KickAss Inverter Remote Display automatically identifies and reports inverter faults, providing detailed diagnostics to simplify troubleshooting.
Intuitive User Interface
The display screen is clear and easy to navigate. View energy metrics, adjust settings, and set alerts with confidence—no guesswork, just clear and precise information.
Compatible with Most KickAss Inverters
The remote display unit is compatible with KickAss 2000W and 3000W inverters (not compatible with 700W or 1200W models). Seamlessly integrate it into your current setup or upgrade your system with ease.
Please note: This remote display is not compatible with older red KickAss 700W, 1200W, 2000W, or 3000W inverters.
| Voltage | 12V DC |
| Maximum Current |
|
| USB | 4 x 2.1A |
| USB-C PD | 1 x 18W |
| QC 3.0 | 1 x 18W |
| AGM Battery State of Charge Guide |
|
| Input Connection | 50A Anderson connector 1M 8B&S Cable |
| Weight | 905g |
| Length | 830mm |
| Cable Type | 8B&S (8.3mm²) single core |
| MAXI Fuse Rating | 80A |
| Ring Terminals | 8mm Ring Terminals |
| Main Cable Length | 6M – With Pre-Crimped Andersons |
| Main Cable Type | Twin Core 8B&S (7.71mm²) |
| Main Cable Insulation Material | PVC |
| Main Cable Protector Material | PVC |
| Circuit Protection | 80 Amp MIDI Fuse – Holder Included |
| Battery Connection Terminals | 8mm |
| High Current Connector | 50 Amp Anderson Connector – Outlet |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 170Ah @ 20 hour rate F.V. (1.80V/cell) |
| Dimensions | 551±2mm (length) x 110±2mm (width) x 288±2mm (height) |
| Approx. Weight | 45.00 kg |
| Terminals | B3 (Fitting M8 bolt & nut), I2 is optional |
| Internal Resistance | 0.045Ω (Fully Charged) |
| Max Peak Discharge Current | 1200A (5 sec) |
| Max Continuous Discharge Current | 37.5A |
| Max Charge Current | 37.5A |
| Operating Temperature Range (Charge) | -10°C ~ 40°C (14°F ~ 104°F) |
| Maximum Operating Temperature | 65°C |
| Operating Temperature Range (Discharge) | -20°C ~ 50°C (-4°F ~ 122°F) |
| Storage Temperature Range | -20°C ~ 40°C (-4°F ~ 104°F) |
| Self Discharge | 3% of capacity declined per month at 25°C |
| Input Voltage | 12VDC |
| Max Rated Current | 84A |
| High Voltage Protection | 16VDC ±0.5VDC |
| Low Voltage Protection | 10VDC ±0.5VDC |
| Efficiency | 88%–94% |
| Output Rated Power | 1000W |
| Surge Power (10s) | 1000W–1200W |
| Surge Power (2s) | 2000W |
| AC Voltage | 240VAC |
| AC Output Regulation | 10% |
| AC Short Circuit & Overload Protection | Yes |
| Waveform | Pure Sine Wave (THD<5%) at Rated Input Voltage |
| Frequency | 50Hz ±1% |
| Operating Temperature | -15°C ~ +40°C |
| Relative Humidity | 20%–90% RH Non-Condensing |
| Weight | 2.4kg |
| Dimensions | 330 x 150 x 75mm |
| Charger Output Voltage Range | 3–16V DC |
| Alternator Input Voltage Range | 9–32V DC |
| Solar Input Voltage Range | 9–32V DC |
| Maximum Input Current | 28A |
| Maximum Continuous Charging Current | 25A |
| Recommended Output Fuse Size | 50A |
| No Load Current Draw | <5 mA |
| Battery Chemistry | LiFePO4 | AGM | GEL | CAL | WET |
| Efficiency | Solar - 99% Max | Alternator - 92% Max |
| Operating Temperature | -20 °C to +80 °C |
| Ingress Protection | IP66 |
| Certifications | RCM Mark | FCC |
| Recommended Battery Capacity | |
| Lead Acid (WET, GEL, AGM, CAL) | 100 – 500Ah |
| LiFePO4 | 50 – 500Ah |
| Charge Profile | |
| Absorption Voltage | GEL - 14.1V | WET - 14.4V | AGM - 14.7V | CAL - 15.3V | LiFePO4 - 14.5V |
| Float Voltage | GEL - 13.5V | WET - 13.4V | AGM - 13.4V | CAL - 13.6V | LiFePO4 - NA |
| Minimum Auxiliary Battery Voltage | GEL/WET/AGM/CAL - 9V | LiFePO4 - 0V |
| Alternator Charge Conditions | |
| 12V Alternator Input (Ignition OFF) | CUT-IN 13.2V | CUT-OUT 12.6V |
| 12V Alternator Input (Ignition ON) | CUT-IN 12.2V | CUT-OUT 10.5V |
| 24V Alternator Input (Ignition OFF) | CUT-IN 26.4V | CUT-OUT 25.2V |
| 24V Alternator Input (Ignition ON) | CUT-IN 24.4V | CUT-OUT 21V |
| Warranty | 2 Year |
| Product Weight | 764g |
| Length | 1050mm |
| Cable Diameter | 10mm |
| Dimensions | 240mm x 136mm x 67mm |
| Operating Voltage | Battery: 10–60 V DC / External: 0–60 V DC |
| Operating Temp. | −20 ~ +60 °C |
| Standby Power | 0.9 W |
| Current Range | ±600 A |
| Current Accuracy | ±0.4 % |
| Voltage Accuracy | ±0.4 % |
| Battery Temp. Sens. Range | −20 ~ +120 °C |
| Battery Types | LiFePO₄ / AGM / Lead Acid / Calcium / Gel |
| Tank Sensor Resistive Input | 0 ~ 500Ω |
| Tank Sensor Voltage Input | 0 ~ 12V |
| Tank Sensor Compatibility | Compatible: Resistive tank sensor/sender with single signal output or voltage-type sensors. Not compatible: Resistive tank sensors with multiple signal outputs. |
| Relay Output | Rated to Battery or External Supply Voltage |
| Display Dimensions | 94 x 94 x 33mm |
| Shunt Dimensions | 133 x 54 x 50mm |
| Gateway Dimensions | 109 x 65 x 34mm |
| Certifications | AS/NZS 62368.1:2022, AS/NZS CISPR32:2015+AMD1:2020 |
| Battery Hook Up Cable | 500mm / 95mm2 |
| Power Hook Up Cable | Positive - 1950mm 14AWG | Negative - 1100mm 14AWG |
| KickAss 12V Mini Control Box with 2 x Anderson, 6 x USB & 3 x Cig Sockets | |
| KickAss Automotive Inline Maxi Fuse Holder with Anderson Plug | |
| KickAss Premium Plug & Play Wiring Kit - 6m | |
| KickAss 12V 170Ah AGM Slimline Deep Cycle Battery | |
| KickAss 170Ah Slimline Battery Tray | |
| KickAss Pure Sine Wave Inverter Remote Display Panel | |
| KickAss 12V to 240V Pure Sine Wave 1000W Inverter | |
| KickAss Smart 12V/24V 25A DCDC Charger With Solar MPPT + Integrated Bluetooth + Pre-Wired Anderson | |
| KickAss 600A Smart Shunt with Battery and Tank Monitor | |
| KickAss 600A Smart Shunt with Battery and Tank Monitor - Power Connections Kit |
Level up your off-grid adventures with the KickAss 12V 170Ah Slimline AGM Complete Dual Battery Kit. This bundle includes everything you need for your 4WD or caravan setup: our high-capacity 170Ah AGM battery, a 25A DCDC charger with integrated solar MPPT, a 1000W inverter for reliable clean power, and a mini control box to efficiently manage outputs. Benefit from the detailed battery and tank monitoring with the smart shunt and ensure a seamless installation with the premium wiring kits. Perfect for explorers needing a robust and versatile power solution.
Happy customer
after a fault with a battery I was given great customer service and covered by the product warranty
Great battery works well this is my 2nd 170 first one lasted well but after 5yrs of continuous use everyday I decided to retire it as a precautionary measure,super happy though
Great
Great
Unlock an extra 15% off
Your cart is empty.
